Logistics data
– Radium code 42618133
– Designation RL-C40 5.5W/230/F/827/E14
– EAN 10 (unit) 4008597181337
– Customs tariff number 85437090
– Transport unit (pieces) 10
– EAN 40 (box) 4008597481338
– Gross weight of the box in kg 0.73
– Box length in m 0.21
– Box width in m 0.09
– Box height in m 0.12
– ETIM class EC001959
– ETIM class designation LED lamp
Electrical parameters
– Rated field lamp power 5.5 W
– Energy consumption kWh/1000h 5.5
– Power factor 0.57
– Nominal voltage 220-240 volt
– Mains voltage (V) 230-240 V
– Voltage type AC
– Nominal current (mA) 42 milliampere
Lighting parameters
– Luminous flux of the lamp in the assigned field 470 lumen
– Luminous flux in 90° mains 470 lumen
– Luminous efficiency 85.45 lumen/watt
– Light color of Radium warm white
– Color temperature 2700 kelvin
– Color rendering index Ra80
– Color stability ≤ 6 sdcm
Lifetime
– Average life 15000 h
– Number of on/off cycles 100000
– Survival rate after 6000h ≥ 0.90
– Early failure at 1000h ≤ 5.0 %
Specification
– Max. diameter 38 mm
– Diameter 36 millimeter
– Total length max. 104 mm
– Length 105 millimeter
– Mercury content 0.0 mg
– Dimmable no
– Lamp shape candle
– Color white
Base
E14
IEC/EN 60061-1
sheet 7004-23-6
Spectrum
As daylight is a mixture of direct sunlight and light from the sky, the spectral distribution changes all the time due to the time of the day and the weather. The standard illuminant D65 corresponds to daylight with colour temperature of about 6500K.
The colour of coloured LEDs depends on the chemical elements within the light generating chip. The coloured light is generated directly and does not need filtering.
White LEDs are either RGB (red + green + blue chip in one LED = light colour white) or blue LED-chips with yellow/orange phosphor in the resin.
Visible region from 380 to 780 nm; height of graph corresponding with relative spectral emission (400mW/klm)per 10nm.
LED retrofit standard lamps 40W replacement, 2700K
daylight(D 65)
Special features
General notes
For LED replacement of halogen and incandescent lamps, we recommend direct replacement (1: 1) at the respective burning position. For new systems, the number of lamps in the circuit operated at control gear such as transformers or dimmers can be obtained from corresponding compatibility lists (if available). If there is no specification for the type of device or lamp required, for safety reasons, the replacement power shall be assumed as taht of the original halogen type (eg “RL-MR16 35” -> 35W, independent of the real power consumption).
The technical design data in accordance with DIN and IEC. The producer does not take any responsibility for damage to persons or property in case of unsuitable operation or handling of the product. Operating data and dimensions are valid within the usual tolerances. Related lamp types (different bases, mains voltages) may be available on request. Sale and delivery are effected in accordance with the Radium Terms of Delivery and Payment valid on the day of conclusion of contract. Packing units offer economical advantages to the purchase and logistic department. Please match your quantity volume accordingly. For orders of a minimum quantity (clefts) with a lamp model the amount lower than the volume of each packaging unit, we will invoice 10 % additional charge per lamp type. Technical changes and terms of delivery are reserved. Manipulation of any kind to packaging or product is not permissible as this will violate Radium brand rights. Furthermore, technical properties of the product can change to its disadvantage or even destruction. Therefore, Radium cannot be responsible for consequential damages.
® = Registered trademark
Subject to change without notice. Errors and omissions excepted.
Safety instructions
To ensure full light efficiency and product life, the permissible temperature ranges must be observed and dry environment ensured. When operated with existing control gear, their compatibility with the lamp must be checked.
Reviews
There are no reviews yet.